Emulsion waterproofing agent BE
BE emulsion waterproofing agent is a water-thinnable, solventless
emulsion, based on a mixture of silane and siloxane.
Dilute solutions of BE emulsion as
highquality, general-purpose water repellents for
hydrophobic impregnating and priming mineral
surfaces. Mineral substrates treated with BE emulsion
are especially characterized by an excellent
Moreover BE emulsion can be used for the mass
hydrophobation of non-load bearing concrete products
Milky white liquid
BE emulsion contains a stabilized
mixture of silanes and siloxanes that are susceptible to
BE emulsion reduces the capillary absorption of
the building which it has penetrated, but does not clog
pores or capillaries. There is therefore little or no
impairment of the building material´s ability to
– good depth of penetration
– rapid development of water repellency
– highly durable and effective beading effect
– tack-free drying
– provides good adhesion for paints
– water-based and environmentally compatible
– stable in storage, even when diluted
USES AND APPLICATION
DiluteBE emulsion is an excellent water
repellent for many absorbent mineral substrates, such
as bricks, sand-lime brick, natural sandstone and
mineral plasters. It is not so suitable for less
absorbent, dense natural stone, especially limestone,
marble and reinforced concrete for bridges and roads.
Owing to its aqueous consistency and storage stability
when diluted, BE emulsion is ideal for inplant
impregnation of building materials made of clay,
aerated concrete, sand-lime brick, fibrous cement,
mineral fibers and lightweight aggregate.
BE emulsion may also serve as a water-repellent
primer for emulsion paints and plasters, silicone resin
emulsion paints and silicone resin plasters.
Tap water is suitable for preparing solutions of
BE emulsion for use as facade water repellent
primer. We recommend an active substance content of
5-10% (dilute the product in the ratio 1:5 to 1:11), the
exact figure depending on how absorbent the substrate
Before handling, read the Material Safety Data Sheet and container label for safe use, physical and health hazard information.
STORAGE AND SHELF LIFE
The "Best use before end" date of each batch is shown
on the product label.
Storage beyond the date specified on the label does
not necessarily mean that the product is no longer
usable. In this case however, the properties required
for the intended use must be checked for quality
BE emulsion waterproofing agent is available in 200L drum and 1000L IBC or others.