The Difference Between Anodizing And Conductive Oxidation

The Difference Between Anodizing And Conductive Oxidation


In order to overcome the defects of aluminum alloy surface hardness, wear resistance, etc., expand the scope of application and extend the service life, surface treatment technology has become an indispensable part in the use of aluminum alloys, and anodizing technology is currently the most widely used and most successful of.

The Difference Between Anodizing And Conductive Oxidation
The Difference Between Anodizing And Conductive Oxidation

Anodizing, electrochemical oxidation of metals or alloys. The process of forming an oxide film on aluminum products (anode) under the corresponding electrolyte and specific process conditions due to the applied current. Anodization, unless otherwise specified, usually refers to sulfuric acid anodization.

The difference between anodizing and conductive oxidation

  • 1. Anodizing is carried out under high voltage. It is an electrochemical reaction process; conductive oxidation (also called chemical oxidation) does not need to be energized. It only needs to be immersed in a potion. It is a A pure chemical reaction.
  • 2. Anodizing takes a long time, often tens of minutes, while conductive oxidation only takes a few tens of seconds.
  • 3. The film produced by anodic oxidation has several micrometers to tens of micrometers, and is hard and wear-resistant; the film produced by conductive oxidation is only 0.01-0.15 micrometers, which is not very wear-resistant, but it can conduct electricity and resist atmospheric corrosion. Is its advantage.
  • 4. The oxide film is originally non-conductive, but because the film produced by conductive oxidation is very thin, it is conductive.

Link to this article: The Difference Between Anodizing And Conductive Oxidation

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:https://www.cncmachiningptj.com/,thanks!


The Difference Between Anodizing And Conductive OxidationPTJ® provides a full range of Custom Precision cnc machining china services.ISO 9001:2015 &AS-9100 certified. 3, 4 and 5-axis rapid precision CNC machining services including milling, turning to customer specifications,Capable of metal & plastic machined parts with +/-0.005 mm tolerance.Secondary services include CNC and conventional grinding, drilling,die casting,sheet metal and stamping.Providing prototypes, full production runs, technical support and full inspection.Serves the automotiveaerospace, mold&fixture,led lighting,medical,bicycle, and consumer electronics industries. On-time delivery.Tell us a little about your project’s budget and expected delivery time. We will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.

Read More

Leave a Reply

Your email address will not be published. Required fields are marked *